How to Cut Crown Molding: The Essential Tips You Need to Know


When the time comes to add a finishing flourish to your home décor, you can’t go wrong with introducing some crown molding.

According to This Old House, crown molding has been around since the time of ancient Greece, and it’s easy to understand why. The intricate patterns of crown molding are stunning and the way it embraces the edges of your home walls only works to create an even more beautiful scene.

If you want to feature that type of décor inside your own home, knowing how to cut crown molding with a miter saw will help.

So, how do you cut crown molding with a miter saw? That’s exactly the topic we’ll be exploring in-depth in this article.

How to Cut Crown Molding with a Miter Saw: The Simplest Method

If you want to try out the easiest way to cut wood for crown molding using a miter saw, you will first need the right tool for the job.

To be more specific, what you’ll need is a miter saw with a tall fence. According to DeWALT, having a miter saw with a tall fence will allow you to cut the crown molding in what’s known as a nested position.

The benefit of being able to process wood in a nested position is that you will no longer have to adjust the bevel angle. What you’ll have to do instead is rest the decorative edge of the molding against the fence and then place the other end on the miter table.

In order to create the pieces you need, you first have to set the angle on the miter table to 45 degrees on the left and then make the cut. You will have to do this again, but the table has to be set to 45 degrees on the right side.

With both cuts done, you should now be in possession of two pieces of crown molding that fit perfectly together.

How to Cut Crown Molding with a Compound Miter Saw: The Basics

Even if you don’t happen to have a miter saw with a tall fence, you can still create your crown molding using a compound miter saw.

According to Hunker, a lot of compound miter saws feature preset angles that will make it easier to create crown molding.

In case your compound miter saw doesn’t come with those preset angles, you can just set the miter angle counterclockwise to 31.6 degrees and then tilt the blade to the left while also placing the bevel angle at 33.9 degrees.

Next, you now have to arrange the wood on the table. Do this by having the decorative side facing up and by having its top edge set against the fence. Nudge the wood to the right side of the blade to make the first cut and then move it to the left side of the blade to create the other cut.

To create the additional cuts, you will have to set the miter angle to 31.6 degrees, but move the table clockwise when doing so. The bevel angle should still be at 33.9 degrees. You can then repeat the steps detailed previously.

As you can see, figuring out how to cut crown molding with a compound miter saw is relatively easy as long as you know the right angles.

How to Cut Crown Molding Inside Corners with a Miter Saw – The Easy Way

If you already know how to cut crown molding using a compound miter saw, then you’ll likely be able to figure out how to create inside corners pretty easily.

Once again, it’s all about setting the right angles when it comes to time to create those inside corners.

The bevel angle of your miter saw can remain at 33.9 degrees while you’re carving your inside corners. There’s no need to tweak it throughout this process.

As for the miter angle, you will want to set it at 31.6 degrees to one side first. Whether you’re starting with the left or right side is your call.

With the bevel and miter angle set, you can go ahead and place the crown molding with the decorative side up on the table. Cut through the wood and then repeat it for the other side with the miter angle also moved.

By the end of the process, you should have two inside corners done.

When you’re trying to work out how to cut crown molding inside corners with a miter saw, just remember those angles and you should be fine.

How to Cut Crown Molding Flat with Compound Miter Saw

Back when we detailed the simplest method for cutting crown molding above, we talked about how important it was to have a miter saw with a tall fence.

But what if your miter saw doesn’t have a tall fence? Can you still produce great cuts?

Yes you can, provided that you know how to cut crown molding flat with compound miter saw.

As the video down below posted by YouTuber Paul Ricalde shows, it will be easier if you have a double compound miter saw as well as 45-45 crown molding instead of 52-38 crown molding.

With the right items prepared, you can start by laying the crown molding flat on the table. Next, you will want to set the bevel angle at 30 degrees and the miter angle at 35.3 degrees to the right. Cut through the wood now.

Before making your next cut, set the miter angle to the left at 35.3 degrees, but retain the bevel angle. Cut through the wood again.

You should now have all the pieces of crown molding that you will need.


Did you enjoy this article exploring how to cut crown molding with miter saw?

The process may seem intimidating at first, but it’s easy to get things right once you know the correct angles and molding placements.

Please feel free to leave your comments below. Go ahead and share this article as well if you know others who need more help when it comes to working with their miter saws.

Related Posts:

Leave a Comment

Your email address will not be published. Required fields are marked *